Property planning guide
Preparing a Commercial Property for Seal Coating
Coordinate pavement repairs, surface preparation, closure notices and striping before seal coating.

Confirm the pavement is a suitable candidate
Seal coating is a surface treatment, not a structural repair. Before selecting it, evaluate potholes, settlement, loose material and areas with interconnected cracking. Repairs may be necessary, or a different rehabilitation method may be more appropriate.
Product selection and application requirements vary. Ask for the proposed product, preparation steps and manufacturer guidance rather than assuming every coating has the same coverage or curing requirements.
Complete preparation before application
Debris, dust and oil contamination can interfere with adhesion. Include cleaning and appropriate treatment of contaminated areas in the scope. Identify cracks and patches that need attention before coating begins.
Protect concrete edges, drain inlets, utility covers and landscaping as appropriate. Clarify whether wheel stops remain in place and how the crew will handle the surrounding surface.
Design a practical closure plan
Divide the property into workable phases while accounting for vehicle circulation, emergency access and accessible routes. A phase that leaves parking available but blocks the only entrance is not operationally useful.
Notify tenants and residents about vehicle removal, temporary parking and reopening. Coordinate refuse pickup and deliveries so heavy traffic does not enter a newly treated area prematurely.
Treat weather and curing as project conditions
Temperature, moisture, shade and product requirements influence scheduling. Ask how the contractor handles weather-related delays and who will communicate changes. Do not use a generic cure-time estimate as permission to reopen.
Obtain written return-to-service instructions. Keeping barriers in place until the designated reopening protects the finish and reduces confusion for drivers.
Restore the parking layout deliberately
Review the striping plan before old markings are covered. Confirm stall counts, access aisles, signs, fire-lane requirements and any approved changes with the appropriate professionals or authority. Seal coating offers a useful opportunity to review markings, but does not itself establish accessibility compliance.
Discuss your property with the project contact
These guides provide planning information, not engineering, legal advice or a property-wide accessibility certification. Project requirements depend on inspection, approved specifications and applicable authorities.
Related planning guides
- Commercial Parking Lot Paving: A Planning Guide
- Asphalt Repair or Replacement: How to Compare Options
- HOA Slurry Seal: Scope, Closures and Resident Notices
- Planning an Asphalt Overlay Without Overlooking the Base
- Accessible Parking and Striping: A Property Manager’s Checklist
- Commercial Concrete: Planning Sidewalks, Curbs and Pads