Property planning guide
Commercial Concrete: Planning Sidewalks, Curbs and Pads
Prepare concrete work around grades, drainage, access, loading requirements and curing conditions.

Identify the function of each concrete area
A sidewalk, a curb and a dumpster pad do different jobs. Record pedestrian use, vehicle loads, drainage needs and connections to adjacent pavement. Material thickness and reinforcement should follow the project requirements rather than a single specification for every area.
Map damaged panels, displaced joints and areas that retain water. Photograph defects and note whether movement appears to continue. Replacing the surface without addressing support or drainage can leave the underlying cause unresolved.
Coordinate grades and accessibility
Concrete work near entrances and accessible routes needs careful elevation planning. Discuss slopes, transitions, landings and drainage with qualified design or accessibility professionals as appropriate.
Grinding may be useful for selected offsets, but is not appropriate for every condition. Evaluate remaining thickness, deterioration and applicable accessibility requirements before selecting grinding instead of replacement.
Clarify removal and construction details
Include saw cutting, demolition, hauling, base preparation, forms, reinforcement, joints, finish and curing in the proposed scope. Identify utilities, irrigation and adjacent improvements that must be protected.
If matching existing finishes matters, discuss appearance expectations before work begins. Age, weathering and material variation can prevent an exact match even with a similar finish.
Plan the site while concrete cures
Provide temporary pedestrian routes and protect fresh concrete from vehicles. Loading requirements, specified mix and curing conditions influence reopening. The contractor should supply project-specific instructions rather than a universal schedule for cars and trucks.
Coordinate dumpster collection and deliveries before constructing pads or loading approaches. A practical sequence avoids exposing new concrete to loads before it is ready.
Prepare a complete request
Send the property location, photos, approximate quantities, traffic loads and desired finish. Include plans and known permit or accessibility requirements. The City Service Paving project contact can discuss the scope and information needed for an estimate.
Discuss your property with the project contact
These guides provide planning information, not engineering, legal advice or a property-wide accessibility certification. Project requirements depend on inspection, approved specifications and applicable authorities.
Related planning guides
- Commercial Parking Lot Paving: A Planning Guide
- Asphalt Repair or Replacement: How to Compare Options
- Preparing a Commercial Property for Seal Coating
- HOA Slurry Seal: Scope, Closures and Resident Notices
- Planning an Asphalt Overlay Without Overlooking the Base
- Accessible Parking and Striping: A Property Manager’s Checklist